STAIR EDGE ANGLES

Discussion in 'Subfloor Preparation' started by TONY74, May 4, 2017.

  1. TONY74

    TONY74 Well-Known Member

    75
    3
    8
    Hello lads whats the best and quickest way to fit the pre formed stair angles for open edge staircases please any tips ? The last one i did was about 20 years ago . cheers
     
    TONY74, May 4, 2017
    #1
  2. dazlight

    dazlight Super Moderator

    7,216
    1,709
    113
    I was thinking the same. I did one in about 1996


    On tapatalk HD
     
    dazlight, May 4, 2017
    #2
  3. Spacey

    Spacey Super Moderator Staff Member

    6,503
    1,881
    113
    Don't
     
    Spacey, May 4, 2017
    #3
    • Like Like x 1
    • Winner Winner x 1
    • List
  4. Freeley

    Freeley Well-Known Member

    189
    23
    18
    Overlap them, Mark with pencil and most importantly use a chopsaw for speed and a decent cut.
    Just make sure you set them out properly with a nosing and piece of carpet or vinyl behind the front edge.

    Sent from my SM-G920F using Tapatalk
     
    Freeley, May 4, 2017
    #4
    • Like Like x 1
    • Agree Agree x 1
    • List
  5. Neilydun

    Neilydun Well-Known Member

    2,893
    1,227
    113
    What Freeley said. We were doing loads of them on new build sites. A hacksaw takes forever, and is not very accurate. Chop saw all the way.
     
    Neilydun, May 5, 2017
    #5

Share This Page