solid wood on asphalt

Discussion in 'Subfloor Preparation' started by oddbod_jnr, May 30, 2013.

  1. oddbod_jnr

    oddbod_jnr Well-Known Member

    649
    242
    43
    give us some pointers lads ,solid oak needs full stick can i screed over ,dpm and then lay, dig it out etc whats the best
     
    oddbod_jnr, May 30, 2013
    #1
  2. merit

    merit Well-Known Member

    8,220
    1,679
    113
    Dig out
     
    merit, May 30, 2013
    #2
  3. oddbod_jnr

    oddbod_jnr Well-Known Member

    649
    242
    43
    Was hoping theres a system i can use. Ardex na can go over i thibk but i dont think tge comp rate is high enough anyone know a way. What about instalay with a dpm anyone used this way before.
     
    Last edited: May 30, 2013
    oddbod_jnr, May 30, 2013
    #3
  4. welsh wood

    welsh wood Well-Known Member

    649
    235
    43
    dpm
    batten
    sec/nail... ? :confused:
     
    welsh wood, May 30, 2013
    #4
  5. merit

    merit Well-Known Member

    8,220
    1,679
    113
    Well if it doesnt need full stick you could use that estillon adhesive underlay crap. na and dpm under it if it needs
     
    merit, May 30, 2013
    #5
  6. Carpetfingers

    Carpetfingers Well-Known Member

    166
    27
    0
    Doing one too, rang f ball last week. Degrease, wash clean & allow to dry. Neat 131, 300 screed not more than 5mm, liquid battens of full stick,. simples
     
    Last edited: May 30, 2013
    Carpetfingers, May 30, 2013
    #6
  7. welsh wood

    welsh wood Well-Known Member

    649
    235
    43
    liquid batten - generally not recommended for solid products, eng. only... :cool:
     
    welsh wood, May 31, 2013
    #7
  8. Matt

    Matt Well-Known Member Staff Member

    6,328
    1,402
    113
    you can either float with a underlay system or batterns. You cant bond to asphalt. Also NA is not strong enough to glue to either.
     
    Matt, May 31, 2013
    #8

Share This Page